Complete Guide to Maschine MKII
This course takes you through every part of the Maschine software and hardware, slowly explaining how each one works and the ways they can be used to create a variety of different styles of music.
The lessons begin by showing how a pattern is constructed, by playing the pads, or drawing in events. Then, there are lessons covering the various pad modes, including step mode, keyboard mode and various velocity modes, explaining how to use them and when they are most suitable. There are then lessons on Scenes and building arrangements within Maschine, the Sampling facility and how to record and edit your own samples, and finally 2 lessons on effects, that teach the full range of effects in the library and how they can be used as inserts or sends for processing sounds, groups and the master bus.
The course comes with written notes, as well as the Maschine projects created in the movies. Plus, there are 240MB of royalty-free samples from Loopmasters included in the course pack. Before signing up, check out the free sample lesson, which provides an introduction to Maschine and the course, on the media tab.
Complete Guide to Maschine MKII - Free Sample Excerpt (Module 1)
Modules in this course:
Module 1 - Introduction to Maschine
This movie provides an overview of Maschine, explaining how the software and hardware work and demonstrating all of the main features. This is done in the context of a completed project, from the final module on the course, as well as showing how a project can get up and running with the hardware in no time at all. The lesson is intended as a quick guide to everything, whilst the remainder of the course then goes through each of these things and much more, slowly and in greater detail.
Module 2 - Pattern Creation I
This module starts to teach you how different patterns can be created, predominantly by playing in events with the hardware pads. Then, there is a guide to some important editing operations, including examples of automatic and manual quantizing and adjusting velocity values.
Module 3 - Sound Slots
This module looks at the individual parts that make up each group, which are the 16 sound slots that can be played using Maschine's pads. These are often single samples, as you find in Maschine's factory kits, but can also be any instrument or plug-in you choose. However, this lesson focuses on adding and editing samples, so you can see how to create your own group from scratch.
Module 4 - Pattern Creation II - Pad Modes
This module teaches the various pad modes available on Maschine, which allow them to be used in a variety of different ways to create patterns, including fixed velocity and 16-velocity modes, keyboard mode and step mode.
Module 5 - Working with Scenes
This module gives you a thorough explanation of how scenes work, which are the vertical columns in the upper half of the software that contain different combinations of patterns, allowing you to switch from one part of a song to another for realtime jamming, or arrange and play an entire song from start to finish.
Module 6 - Sampling
This module shows how Maschine's Sampling facility can be used to add your own sounds to songs, by recording and then editing them in a number of ways. There's also a guide to how to slice up larger samples and assign them to Maschine's pads for innovative ways of performing live or producing.
Module 7 - Effects
This lesson runs you through how to apply effects processing to sounds within Maschine, be they individual sound slots in a group, whole groups or the master output, so all groups simultaneously. As well as providing a guide to the range of effects on offer and how to use them, this should also help to further develop your understanding of the Modules section of the software.
Module 8 - Advanced Effects and Routing
This module looks at some more advanced effects processing techniques, including how to automate parameters, how to create send effects and then also how to route sounds in and out of Maschine, allowing them to be mixed and processed using other software or hardware.
Bonus Module II - Using Maschine in a DAW
This bonus tutorial gives a thorough guide to using Maschine in plug-in mode within a DAW like Live or Logic, including how to automate parameters.
Bonus Module I - The Controller Editor
This lesson shows how the Controller Editor can be used to turn Maschine into a comprehensive control surface for Ableton Live.
Rob is a classically trained musician, with piano as his primary instrument, and obtained a degree in music and sound recording (the prestigious Tonmeister course) from the University of Surrey. Having honed his skills both at University and in the studios in London where he worked in a technical role, he began releasing music on labels like Lot49, Dead Famous and Erase, under the artist name Anarchy Rice. Rob has been at the forefront of music software training since the very beginning, having kicked things off at Focusrite back in 2006. With both classical music and technical sound qualifications, as well as a wealth of presenting experience, he is ideally suited to the role of an online music trainer, and is 100% dedicated to sharing his knowledge and assisting others with what he believes to be one of the most rewarding things in life - making music!