Producer's Guide to Thorn
- Over 2 Hours of Tutorials
- Access 24/7/365
- 10 Thorn Presets
DS Audio’s award-winning software synthesiser Thorn has received praise throughout the world for its powerful, spectrally-synthesised sound and innovative design. On this course from certified trainer Rob Jones, you’ll be guided through each part of the instrument, to help fully grasp all of the unique features on offer.
After providing an overview of the synth’s architecture, Rob dives into a series of lessons that explore the less conventional aspects, like its harmonic editing and filtering, sampling capabilities and glitch sequencing. He then moves onto the meat of the course, which is a number of step-by-step guides to creating a wide range of patches, helping uncover all the hidden depths of the instrument, whilst providing a wealth of useful sound design techniques along the way!
On the course, you’ll learn how complex patches like evolving basses, floaty sequenced pads and arpeggiated leads are constructed, as well as how to utilise advanced synth features such as FM.
Signing up to the course entitles you to immediate access to the 2 hours of streamed tutorials, as well as the 5 presets made on the course and a further 5 bonus presets from Producertech’s Thorn Dance Essentials preset pack.
Glitch Sequencer Demo
Module Descriptions
Module 1 - Introduction to Thorn
The course starts with an introduction to the synth, looking first at the overall architecture and any deviations from standard instrument layouts or unique features, then focussing on the header bar at the top, showing the preset section and settings menu.
Lesson 1 - Thorn Overview 02.34
Lesson 2 - Preset Handling and Settings Menu 03.15
Module 2 - Oscillators
A detailed look at the Harmonic Editor, for editing or creating customised waveforms and wavetables, and the oscillator FX, where individual oscillator processing or cross-oscillator modulation can be applied.
Lesson 1 - Harmonic Editor 05.34
Lesson 2 - Oscillator FX 02.18
Module 3 - Sampling
A demonstration of how the Noise section can be used as a sampler, for layering your own audio samples with synthesised sounds.
03.55
Module 4 - Harmonic Filter
Rob explains the various controls and options in the Harmonic Filter section, for manual sculpting of a preset’s spectrum.
03.57
Module 5 - Glitch Sequencer
A guide to Thorn’s glitch sequencer, for application of automated FX sequences.
06.32
Module 6 - Preset 1 - Glitchy Bass FX Sequence
The first preset on the course is quirky, rhythmic FX one, showing some very useful techniques in its conception, including numerous modulation of oscillator and filter parameters, how to set the filters in series, multistage envelope modulation combined with gated glitch sequencing, and more.
Lesson 1 - Oscillator 1 Filtering and Sequencing 08.01
Lesson 2 - Oscillator 2, Subs and Serial Filtering 08.45
Lesson 3 - Applying Effects 12.47
Module 7 - Preset 2 - Sweeping Filtered Bass
An evolving bass patch is created, using oscillator 1 in wavetable mode and modulating the position and phase dials with an envelope to create the sweeping effect. The bass is then filtered using filters 1 and 2 in parallel mode, as well as the harmonic filter, all of which are modulated with envelopes and LFOs. Finally, the transient is bolstered with a percussion sample before various effects are applied.
Lesson 1 - Oscillator 1 Setup and Modulation 04.19
Lesson 2 - Filters Setup and Modulation 08.46
Lesson 3 - Adding Perc, Tweaking and Processing the Sound 04.58
Module 8 - Preset 3 - Arpeggiated Lead
A rhythmic lead patch is made, beginning by setting up the 3 oscillators as identical but detuned waveforms, each with some LFO modulation, then using the arpeggiator to create a dancing melodic sequence. Noise is added to the transient before a number of different effects are applied.
Lesson 1 - Setting up Oscillators 1-3 03.44
Lesson 2 - Adding and Editing the Arp 07.03
Lesson 3 - Adding Effects 03.51
Module 9 - Preset 4 - FM Bass
Rob shows how to create an FM (Frequency-Modulated) patch, using both oscillators 1 and 2 in FM mode to create distinctive characters in the transient. The filters are then used to process the sound, with filter 2 in parallel providing some upper textures to the patch. Finally, some effects are applied and various parameters adjusted to demonstrate the different timbres on offer.
Lesson 1 - Setting up Oscillators 1-3 05.03
Lesson 2 - Parallel Filter Processing 04.39
Lesson 3 - Effects and Modifications 05.30
Module 10 - Preset 5 - Lush Ambient Glitch Pad
A floating pad sound with rhythmic textures is made by first creating a phasing saw by drawing in the Harmonic Editor and then modulating with an LFO, then pasting this to oscillators 2 and 3, which are transposed and spread in varying amounts. The sound is then shaped with all 3 filters before being processed with effects and the glitch sequencer.
Lesson 1 - Setting up Oscillators 1-3 10.02
Lesson 2 - Filtering 07.17
Lesson 3 - Effects and Glitch Seq 05.14
Rob Jones
Rob is a classically trained musician, with piano as his primary instrument, and obtained a degree in music and sound recording (the prestigious Tonmeister course) from the University of Surrey. Having honed his skills both at University and in the studios in London where he worked in a technical role, he began releasing music on labels like Lot49, Dead Famous and Erase, under the artist name Anarchy Rice. Rob has been at the forefront of music software training since the very beginning, having kicked things off at Focusrite back in 2006. With both classical music and technical sound qualifications, as well as a wealth of presenting experience, he is ideally suited to the role of an online music trainer, and is 100% dedicated to sharing his knowledge and assisting others with what he believes to be one of the most rewarding things in life - making music!